Dulux Woodgard Timbapreservative

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage Approx 10 m² per litre per coat
  • Drying Time Dependent upon temperature and humidity.
  • Coats 2
Product Features
  • Long lasting protection
  • Weatherproof

Product Description

Woodgard Timbapreservative is a penetrating wood dressing for the protection of all exterior wooden surfaces only

Application Description

Brush or conventional spray.

Health & Safety

"Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry - no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD TIMBAPRESERVATIVE is not recommended for floors or decking."
Download Adobe Reader
  • Dulux Woodgard Exterior Timbapreservative.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Suitable for application to exterior windows, doors, barge boards, etc.
  • 2. Cleaning
    FIXIT BRUSH CLEANER/DEGREASER or Mineral Turpentine.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.