Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!
Our latest tips and inspirations are on their way to your mailbox
No Colour Selected
Maxicover Pliotex
A weather resistant, textured matt finish with good dirt shedding
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage Approx 5-6 m² per litre per coat
-
Drying Time 1 hour
-
Coats 1
-
LONG LASTING PROTECTION
-
WEATHERPROOF
-
HIDES IMPERFECTIONS
-
GUARANTEE 8 YEARS
Product Description
Maxicover Pliotex is a weather resistant, textured matt finish with good dirt shedding
Application Description
Ready for use with brush or roller. Spray is not
recommended as Maxicover Pliotex contains fine marble
aggregate.
Rolling It is important not to overspread the product. Two
coats should be applied allowing at least four hours between
coats.
Caution: Textured coatings are prone to application
restrictions to some degree. Adhere strictly to
recommended spreading rate. If the spreading rate is
exceeded, the film thickness is reduced. On the other hand,
if the paint is under-spread, thicker patches would be visible
on flat surfaces. Apply with overlapping V-shaped strokes,
i.e. a combination of horizontal, diagonal and vertical
strokes. It is also very important to maintain a wet edge
during application. N.B. We recommend that a lamb’s wool
roller be used. The pile on synthetic rollers is longer,
making the desired result difficult to achieve.
recommended as Maxicover Pliotex contains fine marble
aggregate.
Rolling It is important not to overspread the product. Two
coats should be applied allowing at least four hours between
coats.
Caution: Textured coatings are prone to application
restrictions to some degree. Adhere strictly to
recommended spreading rate. If the spreading rate is
exceeded, the film thickness is reduced. On the other hand,
if the paint is under-spread, thicker patches would be visible
on flat surfaces. Apply with overlapping V-shaped strokes,
i.e. a combination of horizontal, diagonal and vertical
strokes. It is also very important to maintain a wet edge
during application. N.B. We recommend that a lamb’s wool
roller be used. The pile on synthetic rollers is longer,
making the desired result difficult to achieve.
Health & Safety
"For detailed safety information refer to Material Safety Data Sheet.
Keep out of reach of children.
Ensure good ventilation during application and drying.
Flash Point 37ºC."
Tips & Advice
-
1. Preparing the SurfacesSuitable for cement plaster, gypsum plaster, concrete, fibre cement, PVC, galvanised iron, ferrous and wooden surfaces provided that appropriate preparation and priming is carried out.
-
2. CleaningClean immediately with water
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Maxicover Pliotex